Earth Digger 4200 hydraulic excavator is the most powerful excavator available today, created for the customer who requires reliability and high production in bulk earth moving or construction projects. CNC machined metal parts, fully assembled, ready to dig! Massive power through 380KV brushless system. Important Note: Due to the size and weight of this product, this product has to be shipped in its own container.  It will be shipped only by Expedited Shipping Service (5-8 days), this requires an extra shipping surcharge of $300 to ship anywhere in the US and all international countries due to the size and weight. Must turn on the transmitter before starting the ESC. Important Note: This product is for experienced R/C users. Not recommended if you just started with R/C.

We can ship it in 1-2 weeks once the order is completed

Specifications:

• 100% CNC Machined Aluminum (except Track and Hydraulic Pump)
  Custom 8 Channel 2.4Ghz radio
  High Intensity Light (Super bright) (3 Watt)
  Optimized Steel Hydraulic system
  Scale operator station (can fit a driving figure and seat)
  Steel Molded Tracks (50mm Width, 45 grade carbon Steel)
  Efficient under carriage with Tracks
  Reliable Hydraulic valve and Adjustable Pump
  Heavy Duty Hoses (OD 4.5mm Nylon, ID 2.5mm)
  Bearing based undercarriage design
  Undercarriage rotate 360 degrees (Endless)
  Powder coated in yellow
  Massive brushless system (Hydraulic)
  60A brushless ESC with BEC
  350KV brushless monster torque motor (4130 OutRunner, 6mm Shaft)
  Neodymium magnets
  Belt/track is controlled individually
  XT60 Power Plug Female
  Run time is: 40-50 minutes (6500mAh battery)
  Steel Machined Oil Pump (45mm X 30mm X 15.5mm)
  Digging force: 15kg / 33pounds
  Driving Speed: 310 Meter per hour
  Scale: 1:12
  Dig Depth: 495mm / 19.4inch
  Height of Cabin: 155mm / 6.1inch
  Length: 1.15meter / 45inch
  Width: 250mm / 9.8inch
  Height: 840mm / 33inch
  Dead Weight: 20kg / 44lbs
  Operating Oil Pressure: 20Bar, 290psi
  Inside Cab Length: 4.72in / 120mm
  Inside Cab Width: 2.55in / 65mm
  Inside Cab Height: 5.31in / 135mm
  Manufactured by JDCustoms
  30 Days Limited Warranty

What's Included: Required Parts:

• Gens ace 5000mAh 11.1V 50C 3S1P Short-Size Lipo Battery Pack with XT60 Plug
  8x AA Batteries for Radio (Z-S1718)
  
   

Optional Parts:

• Chevron AW ISO 32 Hydraulic Oil 14oz (Z-X0042)

Note: During operation, HID light might flash due to power drain.

Notes:

• While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply threadlock to some of the hardware that is already installed.
  ESC Supports XT60 Connector
  Use good quality hex drivers to avoid stripping screw heads.
  Use thread lock when putting metal screws into metal parts.
  Steps marked with an asterisk (*) require thread lock.
  Use thread lock sparingly.
  Do not over tighten screws otherwise you may strip the thread.

Warranty information
This product is made for heavy duty usage. Since there is no plastic parts, its designed to last. But hydraulic pump, hoses and electronics system can break over time. Do not let the system overheat during usage. We will have all spare parts available for sell. Pump, hoses are electronics system is not covered under warranty, but we do guarantee fully functional at arrival. Each unit is full tested twice before we ship.
Each unit is professionally assembled, adjusted and tested. Do not adjust the oil pressure switch. Oil pressure will drop as you operate over time.
This Excavator is shipped without oil. You will have to fill the tank your self (half tank), by using a funnel or tube (not included).

Video Tutorial:

• Click Here to See More

Breakdown of the Excavator by RC Sparks